I updated the 10/22 above with a new stock, a good companion for my MK II Target.
Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
My new 360 just in from the builder. Woox, Mullerworks, EC V2, Atlas, and B&A trigger.
Sun is finally out in SoCal, took it out today for a spin.
I like the paint job.
That looks like Angeles shooting range in Sylmar. Good to see a current pic, I grew up shooting there.
Just showed this to my wife. We both said the style is late 80's, early 90's new kids on the block.
I like it.
New barreled action from DI Precision. Curtis Axiom with the rimfire conversion kit. 1.25” straight Krieger at 23”. 21 pounds as pictured.
Curtis does for the Axiom, Valor, and Scout. DI cuts the tenon like a Vudoo instead of a cone breach.Does Curtis make the 22 conversion or is it something DI does? I have an older Curtis action sitting around and you’ve got me thinking.
Anschutz 1710
MDT \ XLR hybrid chassis
Spuhr mount
ZCO 527
MK Machining turret magnification
GRS spigot
Ulfhednar bag
MSA Sordin cans
I became aware of a new compact lightweight front rest from Seb. This one was designed by his son Christopher. I placed an order and got it in less than 2 weeks. It weighs about 7 lbs and cost me about $750 shipped. Since I only shoot RFBR I feel this will be better for me.
I tend to swap stock to see what happens. I really dig the Manners LRH with a 1.25 barrel channel.
Same BA just swapped to the Foundation Revelation.
Same BA just swapped to the Foundation Revelation.
Sweet set-up Defender32, can you tell me how much cant you have in your scope base as well as your rings? I'm guessing a total of 50MOA between the two???
Also with 50yd zero how much elevation can you get out of your turret before it's maxed out?
Thanks
It is 50 MOA total. 30 on the scope rail and 20 in the SPUHR mount. I can dial past 400y with a 50y zero. I don't know what the max is out of it.
Sweet, thanks! I'm getting ready to build pretty much the same set-up on the new Matrix Pro II chassis and figured 50 MOA total would work. With 50 MOA I'm pretty sure I'll be able to dial to 500-525 yds...
Vudoo 360/DI Precision chambered
Muller Works 1-13t 25” straight
MPA Matrix Chassis
Trigger tech diamond single stage
Gray Ops weights
EC tuner
ZCO 527
Hawkins mount
It
R50
Rim X 1.25 straight 13tw MW 25"
Modacam Chamber
Manners TCS full weight kit
TT Diamond
ZCO 527
ARC 30moa mount
BT 35 bipod?
Modacam Chamber
Manners TCS full weight kit
TT Diamond
ZCO 527
ARC 30moa mount
BT 35 bipod?
Scaled back on my Vudoo.
Replaced the Foundation with a Manners LRH, Hawkins DBM
Slapped a NF F1 4-20 mil XT on it
Going to run a Harris bipod, hillbilly shit here
Wanted a lighter fun gun, still 13.5lbs, semi heavy fun I guess, I kind of like it though
Replaced the Foundation with a Manners LRH, Hawkins DBM
Slapped a NF F1 4-20 mil XT on it
Going to run a Harris bipod, hillbilly shit here
Wanted a lighter fun gun, still 13.5lbs, semi heavy fun I guess, I kind of like it though
Vudoo 360 RB/LP
24" Kreiger MTU
Manners PRS-TCS
TT Special - 2 stage - Flat shoe
Leupold Mark IV 6-24x52
16.5 lbs w/o bipod and balances like dream
You mean V22S, correct. I don’t think they make a 360 RB/LP.
LOL…nope it’s a 360 action with right bolt and left port…they do make them and it is a repeater not a single shot.
Right handed but like being able to see the chamber area without breaking position and thank you!
I also have a 360. It’s a RH version. I probably would have bought the RB/LP but there was/is no mention of it on the website.
I had mine built by DI Precision as they offered many options that Vudoo did not
Are you saying they modified it, or? By the way, really like your rifle.
Last edited:
No I am saying they offered it as an option along with a barrel longer than 22" and a faster twist rate....Vudoo did not offer these options. I run RB/LP on my f-class rifles so it felt comfortable and being able to see the chamber area was a bonus....I really like it too!
Thanks for the update but when I called to order a few months back that was not an option and only up to 22" in MTU 1:16 twist rate was the only option.
It's been an option for about a year now. I got mine last June and others had it before I did.
Here is the email reply from Vudoo dated 1-10-24 where I asked for my Gen 1 to be re-barreled:
Hi Brian,
Thanks for the inquiry. We do not offer 13" twist barrels. We would recommend DI Precision for a 13" twist. We can do MTU-V barrels in 16" but only out to 22". Our lead time is probably 8 weeks and cost is $700 plus shipping.
Best,
Vudoo Gun Works
St. George, UT
(435) 359-2890
Yes the MTU are only to 22" and if you asked for an MTU then that would have been a correct answer but the 1.2" have been available for the 24" length for a while now.
Thanks for the clarification @Rob01 but what I asked for was a heavy contour barrel in 1:13 twist and that was their answer. This is my 3rd Vudoo and love them all but ordering one is like ordering a new truck with only the options they have available....not exactly custom.
Yeah the fast twists are not available so that would be an option you would have to go elsewhere for as none of the Vudoo barrels are 13 twists. Vudoo has a good selection for people in the Kukri, MTU and 1.2" and in that allows them to get their rifles to customers in a couple months versus longer if ordering a custom but if looking for faster twist and longer than 24" then getting another smith to put it on will be the way to go.
Anschutz 1727F Accuracy International AT-X AICS. (fits the Fortner action and the 54-18 repeater
Saw this my gun store today and it spoke to me so I decided to take it home. Not sure how I'll kit it out but I like it! CZ Manners MTR...
KelTec CP33, NGAL, PVS-14, Dead Air Mask:
Tac Ops Green Hornet, surplus CAG used Vortex Razor HD 1-6x24:
Tac Ops Green Hornet, surplus CAG used Vortex Razor HD 1-6x24:
- Anschutz 1710 HB 23” SS 22LR Classic two stage trigger 5119
- Athlon Cronus BTR GEN2 UHD 4.5-29x56
- Spuhr rings
- Murphy Precision 20 MOA Picatinny rail
Ruger Precision 17 hmr Vortex Crossfire and a Tippmann M4-22 Pro 22lr. I don’t have an optic yet
Left: RRA .22LR upper on Colt lower w/ Geissele trigger, Vortex Viper PST 5-25X w/ MK Machining scope caps & ARD, Atlas bipod, Smith flash hider, MagPul PRS buttstock w/ MDT bag rider.
Right: RRA tactical carbine .22LR upper, Sig SRD-22X suppressor, Atlas bipod, Burris BTS-35 Thermal scope, Anderson lower w/ Hiper-Fire Eclipse trigger, MagPul UBR Gen-2 buttstock.
Steel witch targets from https://www.atlastargetworks.com/
Another view of the RRA tactical carbine .22LR upper with Burris thermal scope.
Right: RRA tactical carbine .22LR upper, Sig SRD-22X suppressor, Atlas bipod, Burris BTS-35 Thermal scope, Anderson lower w/ Hiper-Fire Eclipse trigger, MagPul UBR Gen-2 buttstock.
Steel witch targets from https://www.atlastargetworks.com/
Another view of the RRA tactical carbine .22LR upper with Burris thermal scope.
