Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
Would love to hear a follow up on how bedding worked out for you. Bedding is one of those things that many stock makers are eliminating for most shooters with the imbedded alum. chassis or bedded blocks in the stock. It's amazing what a good bedding job can do though for a rifle!
Here you go .........I have actually got a little better accuracy out of it since I fired these.
I am sure the aluminum chassis or bedding blocks help, but I dont think they are quite as good as a proper bedding job, I see no way they could get a perfect fit due to variations in the manufacturing process of both the rifle and the stock. Bedding done correctly is as close to a perfect fit as one can get.
Here's a couple of mine. The BR gun is new, Stiller 2500X in a RoTex stock, just got it Friday. The chassis gun is a Savage TRR-SR in an Oryx chassis, it is one I've had for a while and is for sale on Armslist, Akron Ohio.
Tikka T1X
Athlon Argos BTR GEN2 6-24 - DIP 25 MOA base, Warne Med. rings
KRG Bravo in Stealth Grey
SilencerCo Spectre 2
Athlon Argos BTR GEN2 6-24 - DIP 25 MOA base, Warne Med. rings
KRG Bravo in Stealth Grey
SilencerCo Spectre 2
New bergara b14r with a cronus scope, it was too windy when I mounted the scope to zero it so I decided to paint the stock.
Ruger 77/22 with DIY cheek riser, Green Mtn fluted barrel and Griffin Armament Checkmate suppressor = fun shooting plinker out pestering the prairie dogs.
This is an old 10/22 build for an off hand plinker. Turned down 20" .920 Green Mountain barrel, home made stock and airbrush finish, polish job, and BX trigger. The blame is all mine for this. No outside ideas or help was allowed.
Vudoo V-22 (Gen 1) 16" Kukri
Vortex Viper PST (Gen 1)
XLR Carbon (15" handguard)
Timney 2 stage
Couple of 10/22’s !
One has a Volquartsen .920 barrel ...Volquartsen trigger , Leupold 36X scope.
The one with the Hogue stock also has a Volquartsen trigger , fitted with a 2X7 Leupold scope.
One has a Volquartsen .920 barrel ...Volquartsen trigger , Leupold 36X scope.
The one with the Hogue stock also has a Volquartsen trigger , fitted with a 2X7 Leupold scope.
A Savage MK II FV-SR in a Boyd's coyote provarmint stock that has had a serious weight reduction plus a Rifle Basix trigger. I made a mistake with this rifle and should have just traded it off instead of trying to improve it's less than great performance.
One more, a Ruger Precision Rimfire which wasn't exactly precision when it came out of it's box. It now wears a home made aluminum bag rider in back and rest shoe in front, aluminum bolt knob I made, and a Timney trigger. It's sitting on my home built front rest. It also has a cheap aluminum muzzle brake I added just see what effect it would have on group size. It surprised me by reducing group size a little instead of making them worse as I expected it to do. Now I feel it deserves the pecision name. Not a vudoo of course but still not too slouchy in the accuracy department.
The old wooden benches are gone from from my range and are now concrete. The new ones are poorly designed IMO. I wish we still had the old ones.
That is a beautiful rifle.
This is an old 10/22 build for an off hand plinker. Turned down 20" .920 Green Mountain barrel, home made stock and airbrush finish, polish job, and BX trigger. The blame is all mine for this. No outside ideas or help was allowed.
Thanks, kp7pwx. I have received several compliments on it at the range and even had a couple of people ask to take pictures of it. I'm not happy with the looks of the black BX trigger though.
One more time. This is was a junk Marlin tube magazine 22 I ran across and decided to rescue. It had six bulges in it's long, skinny barrel and about six inches of the rifling was destroyed on the muzzle end. My original plan was to reline the barrel and refinish it's poor ol' stock and make it a truck gun. The lifter mechanism didn't work correctly anymore and my repair efforts failed so I decided to have some fun with the old thing. I relined the barrel, removed the tube magazine turing it into a single shot and then made a new stock. The bolt handle wouldn't clear a scope and had been welded back on. When I began to heat it to bend it the handle fell off! So I made a new handle, welded it in place and polished it up. Turned an aluminum knob for the bolt handle and whittled out an aluminum buttplate and trigger guard. Then I went a little crazy with the airbrush on the stock. It shot fairly well but I experimented with different muzzle devices I made and the brass blob you see on it made quite a difference.
New Bergara B14R carbon fiber barrel action came in yesterday! Had a Cadex Nuke Evo in Vortex brown waiting for it. Put a Blackhound 6-24x50 optics and managed to get off 50 shots before the sun went down.
16.5” Savage FVSR .22lr
This thing is a blast to shoot when the big guns are cooling down. It is very accurate with CCI SV. Anything inside of 300 yards is easy. These make great affordable trainers.
This thing is a blast to shoot when the big guns are cooling down. It is very accurate with CCI SV. Anything inside of 300 yards is easy. These make great affordable trainers.
Last edited:
Some great shots of the new strike nuke inlet for the T1X. These are shipping now.
Attachments
Cooper 57M .22 Magnum and Anschutz 1720HB .22 Magnum
Finnfire II .22lr and Anschutz 1712 Featherweight .22lr
Anschutz 1717HB in .17HMR
Finnfire II .22lr and Anschutz 1712 Featherweight .22lr
Anschutz 1717HB in .17HMR
Last edited:
Posted it in the 10/22 custom shop area, but here is a custom shop in a decent stock
Took my daughter to the range for the first time to shoot her new .22
She has never shot anything other than her RWS pellet gun. Her first shot and she nailed the 100y target dead center
She has never shot anything other than her RWS pellet gun. Her first shot and she nailed the 100y target dead center
Last edited:
UK shooting is limited in what we can have....but with the right paperwork .22rf semi-autos are ok 
Got a couple....
All currently for sale (apart from the Tippmann) so I can get a RPRf - prices in the UK are eye-watering
Got a couple....
All currently for sale (apart from the Tippmann) so I can get a RPRf - prices in the UK are eye-watering
Last edited:
UK shooting is limited in what we can have....but with the right paperwork .22rf semi-autos are ok
Got a couple....
All currently for sale (apart from the Tippmann) so I can get a RPRf - prices in the UK are eye-watering
While in the local farm and ranch store I went by the gun counter. The selection there is picked pretty clean due to our current panic but I spotted a RPRR there for $379.00.
Cheapest I can find in the UK, £620 = $780.....
Just so you don't think it's a 'Ruger thing', all US firearms and accessories from all manufacturers has the same mark-up when imported into the UK.
Upgraded from my S&B and now she is now wearing a ZCO 5-27 MPCT 2 
So you now have a Vudoo costing about $8000?
Does it shoot better than a factory $2800 rifle with a $1000 Vudoo PST Gen II?
Does it shoot better than a factory $2800 rifle with a $1000 Vudoo PST Gen II?
I think there are a lot of guys that build their .22 trainer to resemble their centerfire rifles, this is not a cheap sport!
I have a Vudoo in an XLR Carbon chassis with a PST Gen1 that seems to shoot pretty well if you look at the 6x5's
What do you mean factory rifle? As far as glass goes, does the ZCO make me shoot better or spot misses better? Probably not at 200yds and in. But it has a metric shit ton of adjustment and alpha tier glass.
I built my vudoo to match my 6BR but tbh I have way more tied up in my 22. Granted my centerfire has a 27” heavy varmint barrel on it and my vudoo has a 18” proof so the weight and balance is quite different. But getting behind them is identical. Also I need to buy all the stuff I want now before I have kids
It sure beats knocking a little white ball with clubs all around a well manicured piece of terrain that would be more suited for a place to participate in long range precision rifle fire.
We were "hitting", at least I was
, a little white ball ( ours is orange) this last Saturday at 200 and 210 yards. They're not useless.
Yeah yeah show offWe were "hitting", at least I was
We were "hitting", at least I was
I've turned those dimply little spheres into enjoyable targets. They are a lot of fun to hit with a .22LR or anything else.
I got tired of chasing them all over the back stop so I devised a method of watching them bounce around but not have to go down range to put my back of place by constantly picking them up.
Below is a target frame that I made. The golf ball is suspended by two lines that are tied through two holes at the top of the wood furring strips.
I used mason line as it is tough. I get it in a dark color that blends in with the backstop. So, even with a scope, all you see is the orb suspended in space.
To get the line through the ball, I drill a hole in it first. The hole needs to be large enough to push a crochet needle through.
I push the needle through the hole and hook a line about 3-4 feet long in the middle. The line is pulled through the hole to the other side far enough to tie a double or triple knot on the looped end.
This leaves two strands of line on the other side of the ball that you can tie to the frame.
The ball will take a lot of punishment but will eventually need replaced. Nevertheless, it lasts a long time.
These photos were taken at range where the ball is located 110 yards away. I like to watch the look on everyone's face after shooting the ball. However, I must say that I need to try the 200 yard challenge. On the other hand, I may try to one-up you with 300 yards
At 300 yards a 1.68 inch golf ball is .535 MOA. So, I think I could give myself 1 out of 5 shots of hitting it with my 224V. I'll get back with you if that happens but first need to charge up the batteries for my camcorder because you skeptics won't take my word for it unless I get video.
Thank you for the write up on this!! I’m be visiting the hardware store and building a rack like this!I've turned those dimply little spheres into enjoyable targets. They are a lot of fun to hit with a .22LR or anything else.
I got tired of chasing them all over the back stop so I devised a method of watching them bounce around but not have to go down range to put my back of place by constantly picking them up.
Below is a target frame that I made. The golf ball is suspended by two lines that are tied through two holes at the top of the wood furring strips.
I used mason line as it is tough. I get it in a dark color that blends in with the backstop. So, even with a scope, all you see is the orb suspended in space.
To get the line through the ball, I drill a hole in it first. The hole needs to be large enough to push a crochet needle through.
I push the needle through the hole and hook a line about 3-4 feet long in the middle. The line is pulled through the hole to the other side far enough to tie a double or triple knot on the looped end.
This leaves two strands of line on the other side of the ball that you can tie to the frame.
The ball will take a lot of punishment but will eventually need replaced. Nevertheless, it lasts a long time.
These photos were taken at range where the ball is located 110 yards away. I like to watch the look on everyone's face after shooting the ball. However, I must say that I need to try the 200 yard challenge. On the other hand, I may try to one-up you with 300 yards
At 300 yards a 1.68 inch golf ball is .535 MOA. So, I think I could give myself 1 out of 5 shots of hitting it with my 224V. I'll get back with you if that happens but first need to charge up the batteries for my camcorder because you skeptics won't take my word for it unless I get video.
View attachment 7374095 View attachment 7374096
I've turned those dimply little spheres into enjoyable targets. They are a lot of fun to hit with a .22LR or anything else.
I got tired of chasing them all over the back stop so I devised a method of watching them bounce around but not have to go down range to put my back of place by constantly picking them up.
Below is a target frame that I made. The golf ball is suspended by two lines that are tied through two holes at the top of the wood furring strips.
I used mason line as it is tough. I get it in a dark color that blends in with the backstop. So, even with a scope, all you see is the orb suspended in space.
To get the line through the ball, I drill a hole in it first. The hole needs to be large enough to push a crochet needle through.
I push the needle through the hole and hook a line about 3-4 feet long in the middle. The line is pulled through the hole to the other side far enough to tie a double or triple knot on the looped end.
This leaves two strands of line on the other side of the ball that you can tie to the frame.
The ball will take a lot of punishment but will eventually need replaced. Nevertheless, it lasts a long time.
These photos were taken at range where the ball is located 110 yards away. I like to watch the look on everyone's face after shooting the ball. However, I must say that I need to try the 200 yard challenge. On the other hand, I may try to one-up you with 300 yards
At 300 yards a 1.68 inch golf ball is .535 MOA. So, I think I could give myself 1 out of 5 shots of hitting it with my 224V. I'll get back with you if that happens but first need to charge up the batteries for my camcorder because you skeptics won't take my word for it unless I get video.
View attachment 7374095 View attachment 7374096
Ours is suspended.
You need to try it on the clock with only one shot after you've shot the entire COF.
One guy in our group hits it consistently. On the clock. After clearing the COF. They started calling him Peter "Golf Ball". He's won the last two matches there.
Ours is suspended.
You need to try it on the clock with only one shot after you've shot the entire COF.
One guy in our group hits it consistently. On the clock. After clearing the COF. They started calling him Peter "Golf Ball". He's won the last two matches there.
Are you using the .22LR at 200 yards?
Also, what is your COF?
I forget to mention the legendary "egg shot." I had to watch the video over and over and over and over again, just to make sure that she wasn't cheating. Just saying.
Yes. So there’s two sides
Left side COF:
75yd: two little man targets with a 1.5” diamond in the middle with a flapper. Alternate left right 5 shots total
100yd: KYL rack with I believe 9 plates
125yd: piano keys and have to spin the black key in the center 360* for it to count as a point. 5 shots total
150yds: ipsc target with3 sets of holes. Top hole are the the smallest and worth 3 points. Middle hole is worth 2 points and slightly larger. Bottom hole is the largest and worth 1 point. 5 shots total as well. Each hole size has a flapper that alternates sides when shot and to get the points it has to completely change sides.
200yd: 5 geometric shapes one shot per shape
200yd: golf ball and you have your last shot to hit it. Worth 5 points.
Right side COF
50yd: KYL rack 8 shots I believe
100yd: Hostage rack. 4 hostages decreasing in size, then a ipsc with shoulder flapper. Shoot flapper twice but it has to flip for the points to count
150yd: 5 geometric shapes, one shot apiece
175&200yd: 4” or 6” plate at 175 And 200yd. One shot per plate alternating for 5 shots. (Holdover stage)
210yds: 5 geometric shapes one shot apiece
210yd: golf ball. Single shot and worth 5 points.
30rds total per side.
You forgot to add on the 100 yd hostage rack that if you hit a hostage instead of the aggressor, you lose 5 points.
3:30 for prone stages and 4:30 for tripod and barrier stages. 7 seconds and 9 seconds/rnd average respectively. And two mag changes. One if you run 15 round mags but I have yet to see that except semi autos.
It looks a lot like this only four and decreasing in size left to right.
Last edited:
Off hand w/ a semi is extremely impressive. It's not like she was missing by a lot either. I couldn't do it like her. My off hand sucks. But give me a tripod.
Beautiful guns deadly! Any idea where I can find a 10-rd. mag. for a 1710? Thanks
This is not a photo but rimfire porn brought to you buy Midway USA.
To experience the full experience of the sensual rimfire pleasure be sure to maximize your video to fill the computer screen.
To experience the full experience of the sensual rimfire pleasure be sure to maximize your video to fill the computer screen.
