Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
My humble little CZ 457. Fairly new to the precision .22lr game so I've only had this since January but I've shot a match almost every month since.
One of the best shooters in our matches runs a CZ. It does have a Mark Chanlynn barrel.
At least I think it does.
Who?One of the best shooters in our matches runs a CZ. It does have a Mark Chanlynn barrel.
I know who Mark is, I mean who is shooting the match with a cz and Chanlynn barrel. I know one fella was running a 40x repeater with Marks barrel. @Jefe's Dope and I shoot the same match together however so that’s why I was asking as I don’t know if I’ve seen that rifle on the line.
For derailing the thread partially, have another picture of my pride and joy
I got my first Ruger 10/22 over 25 years ago. It was a full house Volquartsen custom with McMillan stock and a nice (for the time) B&L variable power scope. I don't think I've shot it in 15 years, but it was still a solid half-MOA gun with match grade ammo then.
These days, to my surprise, there are an incredibly large number of excellent custom shops specializing in the 10/22 format firearms and components.
So, the 10/22 bug has bitten me again.
Here are the first two 10/22 rifles I've assembled, very practical lightweight take-down clones that would not have been possible more than a few years ago. The only Ruger part is the 10-round rotary magazine. The take-down (aka "TD") receivers and barrels are by Tactical Solutions (aka "TS"). For the trigger groups, I went with Timney's 2.5 LB single stage with extended mag release. The simple elegance of the Magpul X-22 stock pulls this 4 LB creation together nicely.
The TS SBX take-down barrel has a built in suppressor shroud that gives you an overall barrel length of 16+". It comes with a pretty nice fake suppressor, as seen with the FDE rig. The gray model has my own Thunder Beast .22 suppressor installed.
These days, to my surprise, there are an incredibly large number of excellent custom shops specializing in the 10/22 format firearms and components.
So, the 10/22 bug has bitten me again.
Here are the first two 10/22 rifles I've assembled, very practical lightweight take-down clones that would not have been possible more than a few years ago. The only Ruger part is the 10-round rotary magazine. The take-down (aka "TD") receivers and barrels are by Tactical Solutions (aka "TS"). For the trigger groups, I went with Timney's 2.5 LB single stage with extended mag release. The simple elegance of the Magpul X-22 stock pulls this 4 LB creation together nicely.
The TS SBX take-down barrel has a built in suppressor shroud that gives you an overall barrel length of 16+". It comes with a pretty nice fake suppressor, as seen with the FDE rig. The gray model has my own Thunder Beast .22 suppressor installed.
NOT GONNA lie those take down 10/22's are sweet...ugh must resist...
NICE RIFLES
DT
NICE RIFLES
DT
Can you tell us how you are using the string around your magazines?
I discovered that Olongapo's M-1 Garand pouch pockets hold a 10 round Savage B-22 magazine easily. With the 10/22 being a smaller magazine, it should slip into the pocket without any problem.
https://olongapooutfitters.com/inde...ame=Y&pkeywords=Y&search_performed=Y&q=Garand
Here's my grab-n-go pouch that I use for the B-22 magazines.
It's just paracord with a loop and knot that is threaded through an opening on the mag holder. It's just long enough to get around the mag and lock the knot in the loop to add just a bit more security as the tension of the mag holder is enough for one 10 round mag but the additional weight and height of the 2 ten round mag mod isn't ideal. It was a quick solve that works well enough for me not to really search for a better solution but not perfect by any stretch.
Hey I hit the little white egg at green mill. I don’t remember if that was 190 or 200 something.Yeah yeah show off
The chassis is actually an airsoft chassis. It was a really good one that I got for cheap that stopped working ... Just didn't feel like messing with it. It's not 100% scale but pretty darn close.
Wish I knew somebody with a mill near me, wanting to have fun on a project... I'd make one of these.
The gun that's in there is an izmash biathlon trainer (BI-7-2KO). That Big Barrel is really just a sleeve, same one that was taken from that airsoft gun.
Just happens to be one of the best shooting 22 is I've ever pulled the trigger on... will hang with my 40x in the picture.
Wish I knew somebody with a mill near me, wanting to have fun on a project... I'd make one of these.
The gun that's in there is an izmash biathlon trainer (BI-7-2KO). That Big Barrel is really just a sleeve, same one that was taken from that airsoft gun.
Just happens to be one of the best shooting 22 is I've ever pulled the trigger on... will hang with my 40x in the picture.
Just want to share some picture of the 1st cousin of your CZ455/AND NOW CZ 457.ACCORDING TO THE STATISTICs REPORT,she was born in australia and share the same bloodline in MAGAZINE WITH YOUR CZ455/457.Then she was raise BY aussie military family the "LITHGOW ARMS" AND name her
LITHGOW 101 22LR (SHE IS IN THE BOTTOM OF THE PICTURE.)
LITHGOW 101 22LR (SHE IS IN THE BOTTOM OF THE PICTURE.)
Attachments
Anschutz 1727 F AV HB 18" factory threaded and back-bored. KG Made Swarm suppressor and Trijicon AccuPoint 2.5-12x42. All in GRS Hybrid pants with GG&G bipod.
Last edited:
Picked this little shooter up for a song a few weeks back and finally got to shoot it tonight, and I’m shocked at how nice it is, and how good my eyes are at 25m with aperture peeps. I was shooting red. My daughter was shooting green with her Savage MKii Stainless with a 3-12 Bushnell.
We take ten shots and sink what we sink and then it’s the next shooters turn.
Honestly, we had to look through her scope to see if I had actually hit anything. Most were first round hits to our surprise.
Anschutz Mod Mark 2000 single shot from 1982.
We take ten shots and sink what we sink and then it’s the next shooters turn.
Honestly, we had to look through her scope to see if I had actually hit anything. Most were first round hits to our surprise.
Anschutz Mod Mark 2000 single shot from 1982.
DJ Dillion built 455 with Lilja 2 groove barrel.
Got her back from MHSA yesterday along with my can cover from cole tac. Had them modify the mag catch to get the mags to sit flush against the bottom of the receiver so we will see how she works at tomorrow’s match. Preliminary testing seemed promising last night though!
Savage Mark II FV 22lr, Oryx chassis, SWFA SS 3-15 x 42 scope
5rds @ 50yds Center X
5rds @ 50yds Center X
Attachments
Last edited:
Here is my Savage 22LR Left Handed at the range this morning.
Shooting 50 yards.
Shooting 50 yards.
Another 10/22 clone built up with the finest components: Tactical Solutions receiver; Kidd trigger; Beyer 10" barrel and "brake"; Kidd chassis; SBA3 brace; Aimpoint Acro P-1 in B&T mount; SF X300. The only Ruger part is the magazine! Weight under 5 LB with loaded 25-RD magazine.
Man, this is not BI-7-2-KO trainer, trainer has different safety and trigger. This is BI-7-2-KO Basic. Receiver is from BI and trigger assembly is from Sable hunting rifle. Also KO means Karabin Okhotnichii (Carbine to Hunt). If you wish to transform it onto something nicer, make new trigger with adjustments like on real BI, it will completely change the rifle character, cut the length of pull and improve the feeling and balance.
My CZ’s. I have another 452 en route.
Just finished this one up, old Ruger receiver with sentimental value. KIDD trigger, barrel, bolt, charging assembly, buffer, pins. Victor stock, EGW 20 MOA rail, pimped out Harris pod.
Just sold my Bergara HMR to fund this little girl.
Can’t wait to scope her up and find out what she likes.
I’ve already got another stock in the mail fitted with an Area419 Arcalock rail, and their 30moa base.
Can’t wait to scope her up and find out what she likes.
I’ve already got another stock in the mail fitted with an Area419 Arcalock rail, and their 30moa base.
That's really cool, I've never seen an Accuracy International style stock for a 22. What brand and model is this?
Top Rifle is an izmash bk-7-2-ko basic biathlon... I think I have that model number correct. The stock is from a G&G Airsoft rifle that was no longer functioning. It's pretty crappy but it's functional and fits me better than the original cheap ass stock.
2nd rifle is a CMP Remington 40x manufactured in the mid-60s... standard Redfield Olympic sights. It's sitting in an old McMillan NRA high power stock... it used to be called modified 40x.
2nd rifle is a CMP Remington 40x manufactured in the mid-60s... standard Redfield Olympic sights. It's sitting in an old McMillan NRA high power stock... it used to be called modified 40x.
Anschutz 1761 MPR, Anschutz Comfort Butt Plate Carrier, Discovery Optics 5-25X50 Scope, BKL Rings, Kalix Teknik Cheek Riser, D3 Precision Trigger Blade, Atlas CAL Bipod.
