Tikka T1X

So I got my T1x mounted in my new Manners Prs1tk. The only mod you have to do is sand a small relief for the bolt release. I am not going to lie, I was to excited to get it mounted and didn't take a close up. I am going to be mounting an area 419 arca rail tomorrow so I can take a close up photo then.

View attachment 7330949

You didn't like the ACC? Blasphemous! :p

I have a Manners PRS-TCS on order one day...
 
I just picked up my T1x. The bolt is smoother than I thought it would be after some of what I have read. If I turn the rifle vertical it falls open. Unlocking the bolt does require a little more effort than I am used to. My KRG Bravo gets here tomorrow. What torque are most people using on the action screws? 40 in-lb?
 
I just picked up my T1x. The bolt is smoother than I thought it would be after some of what I have read. If I turn the rifle vertical it falls open. Unlocking the bolt does require a little more effort than I am used to. My KRG Bravo gets here tomorrow. What torque are most people using on the action screws? 40 in-lb?

I am at 30 in-lbs. People use anywhere from 25-45 in-lbs. 40 in-lbs is a safe number. If you want to squeeze out every once of accuracy from you T1x. I recommend starting at 25 in-lbs and shooting groups at 25, 30, 35, and 40. Then stay at the number that works best for you.

Ammo wise, i have been getting great results with Center-X and SK Match.
 
Got her put together. I still need to adjust for eye relief and level the scope.

Azj763k.jpg
 
Last edited:
Talked with Craig at PDC Customs and he is working on a chassis for my Tikka T1x looks like great stuff to me at a reasonable price. I will post pictures when I get it. I have no interest in the company just want to give him a plug, $435 and $485 inlets for 10/22, CZ 452, CZ 455, CZ 457, and Savage M2/93

Pictures and link to web site.
https://www.pdccustom.com/shop/
49922907541_da2a4158a0_h.jpg


49922392043_7e9a6311b3_h.jpg
 
Talked with Craig at PDC Customs and he is working on a chassis for my Tikka T1x looks like great stuff to me at a reasonable price. I will post pictures when I get it. I have no interest in the company just want to give him a plug, $435 and $485 inlets for 10/22, CZ 452, CZ 455, CZ 457, and Savage M2/93

Pictures and link to web site.
https://www.pdccustom.com/shop/
49922907541_da2a4158a0_h.jpg


49922392043_7e9a6311b3_h.jpg
When will the folding version be available? Can we choose color too?
 
It almost seems like you have drag in the tow locations indicated in the photos. I know if I put any downward pressure on my bolt and I mean even a little it drags there and my bolt would do exactly what yours is doing. Maybe something there is a little out of spec. Does the friction ease up if you lift the bolt knob just a slight amount when you are cycling?

0DADC9F6-62CB-42E0-80D7-527773C09C60.jpeg
37CF51F8-B3D6-443A-AFC4-9E49A705773A.jpeg
 
It almost seems like you have drag in the tow locations indicated in the photos. I know if I put any downward pressure on my bolt and I mean even a little it drags there and my bolt would do exactly what yours is doing. Maybe something there is a little out of spec. Does the friction ease up if you lift the bolt knob just a slight amount when you are cycling?

View attachment 7334293View attachment 7334294
Bolt won’t go forward with any upward pressure. Downward pressure it’ll close. It’s actually smoothest with some downward pressure.
 
Bolt won’t go forward with any upward pressure. Downward pressure it’ll close. It’s actually smoothest with some downward pressure.
My 2 cents - try taking the magazine housing off, this has the ejector spring attached to it.
Last idea - the dowel pin through the shroud - make sure its flush on both sides otherwise you'll feel that getting hit every time it sticks out.
 
  • Like
Reactions: ntrinsik
Was much smoother with the mag well out. Very smooth with the bolt release depressed but still a little tough with it left alone. With the mag well back in it’s pretty much like the prior videos. Maybe it’s both the spring and the bolt release. Also made sure the pins were flush.
ACF61C91-F9DC-4435-859D-5090B07C2A62.jpeg

Definitely see some wear on the bolt where those marks are rubbed off. Not sure if I should try polishing the bolt or just send it to Beretta. Worried that might void warranty?
 
I put up a wtb ad in the rimfire fs section and had two guys hit me up. One had both the other had just the swept handle only. He still has the handle I'm pretty sure if you pm him. His member name is zenbike
He has already sold it. :(. If anyone has a Sterk swept handle you want to sell, or know of one currently available, please let me know.
 
Yea.. found couple of sites selling for $427-ish, but after S&H they are basically same as GAG which I have had several good experience with. I may just pull the trigger... I wish they bring in 16" to the UIS market... but I guess I can always chop it down if I really want...

That's the best price around atm, from a reputable source anyway. I got mine for $436 + S&H tax, but this was a few months back.
 
Maybe see if the screws mounting the scope rail are a little too long causing them to contact bolt through receiver. Had that happen on a t3x.
Reinstalled them and while it didn’t fix the entire issue it’s maybe 10% smoother. Maybe had just a tad too much torque on them before. I’ve run the bolt another 300 or so times and it’s getting there. Going to try some polishing/lapping compound.
 
Guys using the victor co titan cheekrest - I know it says you can only stack a total of 4 spacers, but if anyone has one do you think 5 spacers would fit?

I have really trash low cheek bones... :(
 
Was much smoother with the mag well out. Very smooth with the bolt release depressed but still a little tough with it left alone. With the mag well back in it’s pretty much like the prior videos. Maybe it’s both the spring and the bolt release. Also made sure the pins were flush.
View attachment 7334400
Definitely see some wear on the bolt where those marks are rubbed off. Not sure if I should try polishing the bolt or just send it to Beretta. Worried that might void warranty?
Put the factory bolt handle back on it and try it, you will be surprised of the difference. Swept backs suck on tikkas from my experience, causing friction due to the angle you are applying pressure. Some people have no issue with them.

Never polished a black Tikka action, it will get gummy. the bolt is fine.
 
  • Like
Reactions: ntrinsik
Put the factory bolt handle back on it and try it, you will be surprised of the difference. Swept backs suck on tikkas from my experience, causing friction due to the angle you are applying pressure. Some people have no issue with them.
This was my experience as well. One gun has a Sterk and works perfect. Other one binds with it so I went back to factory.
 
Put the factory bolt handle back on it and try it, you will be surprised of the difference. Swept backs suck on tikkas from my experience, causing friction due to the angle you are applying pressure. Some people have no issue with them.

Never polished a black Tikka action, it will get gummy. the bolt is fine.
I removed the Sterk bolt shroud cause I saw one side I could stick a fingernail in and the other I couldn’t and it’s now a ton smoother. Swapped the handle back to factory and while it’s not T3x smooth, so much better. I’m hoping a thousand rounds or so through it help smooth it out more.

Thanks all for the help!
 
  • Like
Reactions: chickon1
Hi, quick question for people with a similar setup. I want to put an AO rail on my T1X. I’m planning on using an Athlon Midas Tac 6-24 with 85 MOA of elevation adjustment and Warne low rings.

I’d like to reach out to 300 yards, so the 30 MOA makes sense. However, I’m gonna do quite a bit of shooting at 25 yards too. Will the 30 MOA rail let me zero at 25 yards, or do I need the 15?
 
Hi, quick question for people with a similar setup. I want to put an AO rail on my T1X. I’m planning on using an Athlon Midas Tac 6-24 with 85 MOA of elevation adjustment and Warne low rings.

I’d like to reach out to 300 yards, so the 30 MOA makes sense. However, I’m gonna do quite a bit of shooting at 25 yards too. Will the 30 MOA rail let me zero at 25 yards, or do I need the 15?

I can't help you with your adjustment question, but you might want to check on ring height & scope clearance.

I have a Athlon Argos with a 50mm Obj. - a 25 MOA DIP base and Warne Medium rings - it has good clearance, but it's getting close.

Tikka-1.JPG


Good luck,
Bob S.
 
Hi, quick question for people with a similar setup. I want to put an AO rail on my T1X. I’m planning on using an Athlon Midas Tac 6-24 with 85 MOA of elevation adjustment and Warne low rings.

I’d like to reach out to 300 yards, so the 30 MOA makes sense. However, I’m gonna do quite a bit of shooting at 25 yards too. Will the 30 MOA rail let me zero at 25 yards, or do I need the 15?
You are going to need rings with about 1" height to center. I just put a 5-25x56 on a t1x with a DIP +25MOA rail. I ordered a couple sets of Vortex precision rings and the best fit was 1.1". 1" should be a good fit for a 50mm objective.
 
Hi, quick question for people with a similar setup. I want to put an AO rail on my T1X. I’m planning on using an Athlon Midas Tac 6-24 with 85 MOA of elevation adjustment and Warne low rings.

I’d like to reach out to 300 yards, so the 30 MOA makes sense. However, I’m gonna do quite a bit of shooting at 25 yards too. Will the 30 MOA rail let me zero at 25 yards, or do I need the 15?

I tried 35 and 45 moa worth of cant with my PST 3-15 (25moa rail plus Burris signature zee rings).
45moa was just a little to much to zero at 40m, so went with 35moa.

30moa should be fine.
 
Nice I like that.

I had a spare rubber bolt knob thingy from amazon and dropped it on till now.
View attachment 7324109
Messy garage counter gets used for everything.
Still have to decide on it I am pulling and getting the barrel cut down or will snag a new barrel from Lothar Walther. IBI probably shoots them best but I want her to have a 16” barrel and IBI doesn’t do that.

first thing is to shoot this barrel. nakoa1 shot it and it seemed to shoot really well so maybe I will just leave it be

What kind of stock is that? I really like it.
 
What kind of stock is that? I really like it.
Thanks is a KKC stock made by Altamont stocks. Quite comfortable. It’s the poor mans GRS stock :giggle:

Had a short period to shoot today, so I took the kids out with me and only got to shoot about 30 rounds through the tikka (about 10 shot of bulk ammo to get it dialed in and then 4- 5 shot groups with Eley action)

F9713388-294C-4A9C-9DB0-F1AA128C69F4.jpeg

all but one group could be covered with a dime (51 yards). Not bad for a portable table and a light breeze. The gun is definitely more accurate than I am. Super excited to see if the wife will compete in the nrl22 with it this year.
 
May I ask where you purchased yours? I am only finding 10/22 KKCs. Definitely unique, first time I've seen it, and I really like the laminate vs the GRS' more synthetic look.
Need to find the emails but I think it was through Dr FrankenRuger . ..... just checked and his website doesn’t work anymore. They were out of Florida and he just ordered them from altamont. You might need to reach out to them or one of their vendors. They should still have the tikka inlet.

(I ordered a 10/22, tikka T3, and a blank that I had Sonoran gunstocks inlet for a 455. But it’s been 4 years or so).
 
I want to run an Atlas bipod with the QD pic rail mount from ADM on the stock t1 stock with the wider slip on factory forend. Anyone know of an adaptor or pic rail that can be bolted into the factory sling stud? Or am I stuck using a sling stud adaptor for the Atlas bipod or installing additional mounting hardware through the stock under the barrel channel to be able to run a pic rail under the factory Tikka forend?
 
I want to run an Atlas bipod with the QD pic rail mount from ADM on the stock t1 stock with the wider slip on factory forend. Anyone know of an adaptor or pic rail that can be bolted into the factory sling stud? Or am I stuck using a sling stud adaptor for the Atlas bipod or installing additional mounting hardware through the stock under the barrel channel to be able to run a pic rail under the factory Tikka forend?
There are lots of options out there. I bought a cheap UTG bipod that came with one. Just google sling stud picatinny adapter and you should be able to find one that fits your fancy