I’d get a long action Bolt Stop and maybe after market mags if you reload.
jaoutdoors.com
It may be a short action magnum case, but what bullet are you planning on running? The oal of the loaded round may put it closer to a medium length.
The shortest stop is for .223. The CTR has the mid length stop which is for full-caliber short actions. The long stop is for long actions.
The CTR stop is the mid stop, there's only three. It isn't special to my knowledge.
highvelocityhuntingaustralia.com.au
Mine is on backorder as well. Should be around the end of July if I remember right.
Sent it to Thunderbeast for their face mount break. https://thunderbeastarms.com/tech/thread-specifications
What do you mean by shoots low? Are you out of adjustment and cant zero?
"Pour out orange soda and get comfy".......this reminds me of back in the day when I used to walk clover field and "hunt grasshoppers" with an old single shot Stevens 12ga.I loved my T3 as a 308, but I've always wanted a 6BR, so I had David Sink in NC build this for me. A 26" Benchmark barrel, Boyd's stock, Warne cantilever mount, and a 6x24 Arken scope, with a trigger that breaks at about 13 ounces. All-up weight is about 14 pounds, but it snugs down nicely on the bench bags, and has turned in some gratifying groups, though load development continues with Berger 105's. I don't hunt, but the primary purpose for this rifle is to snipe yellow-jackets and other stabby-butt things at distance. Pour out some Orange Soda and get comfy, they always find it in a few minutes.
I call it the BlueJay.
It can but you’ll need to do a little bit of milling on the inside surface of the stock to allow it to mate snugly on the bravo otherwise there’s a small gap between the tang. This doesn’t affect the buttstock attachment to the TRG forestock if you want to switch it back. The only downside is you can’t use the 10mm TRG cheek spacer because the Tikka SA bolt will hit.
They have/had both. Gen 1 was ctr, the gen 2 that Dave has above is AICS.
IIRC all the KRG Tikka chassis have to be modified for LH. Pretty easy to do though(I have a Bravo cut for LH).
Had to get it modified. Before.
Please post pics. I've got a possible project someday messing with trigger stuff.
Details on that bolt? Haven’t seen a factory black fluted bolt in my recent searches.
I had the factory bolt fluted by @LongRifles Inc. (pattern A, high helix) and then I cerakoted it black myself. Pretty simple but man I like the look of it!
. 
