Rifle Scopes Zero Compromise Optic update
- Thread starter gebhardt02
- Start date
Only seen the green so far. I'll play with it on red sometime because the green seemed a little underwhelming.
Incredibly beautiful.
If you don’t mind, let me know roughly how much clearance you have under the bell of the scope.
Taking some measurements tomorrow. Putt an nvg rail (mainly to function as a handgrip) on the AT and want to make sure it will clear it without the rail.
I'm at school right now, so I won't have it on a rifle until summer.
But! The mount is 1.18" and the outside objective diameter is 2.48". That puts the objective at -0.06" in relation to the rail it's mounted on.
WJM,
I use green lights at night for hunting so I could see how a black un-lit reticle, or a red reticle would work. I know others use red light for predator or varmint hunting at night. I could see the green illumination being useful there. I personally don't use red flashlights so I can't comment based on experience. Take it for what it is...
If you can afford a ZCO, you should also own a thermal if you hunt at night... Nahhmsayinn
Lol, didn't think of that...
Good point, but if you're broke like me, and you have a ZCO, you probably have absolutely nothing left, or a shit load of debt Haha! ???
Last edited:
If the shipping stars align, I should have an mpct1 by next Friday.
Mpct2 from CS shortly after hopefully.
Once it’s officially shipped, I’ll make a (reasonable) list of requests and see what I can do.
Been looking through the thread. Might have overlooked it, but has the 4-20 shipped been announced?
The green illum just doesn't have as much contrast during daylight. Because of this it'll seem dimmer in bright daytime. Please use it in a variety of lighting conditions and let us know what you think.
If anyone wants a ZC527 MPCT1, I will have two soon. Please give me a call at 916-670-1103 
If anyone wants a ZC527 MPCT1, I will have two soon. Please give me a call at 916-670-1103
Any word on the MPCT2?
I will notify our customers directly as there scopes start shipping to us.
Thank you for your patience
That scope looks sweet.How are you liking the ARC rings? And what height did you go with.
The ARC rings are great. Super simple. They are 1.1" high - on their website it's the medium height rings.
I decided to pull the trigger and pre-order the 4-20 from Mile High today. Why does anyone care? Well, I think it's worth noting because I had been planning on buying a Schmidt and Bender 3-20x50 Ultra Short with MSR2 reticle until reading this thread and hearing people talk about the Zero Comp products. The 4-20 fits right in the same category as the S&B Ultra Short and frankly, I like the MPCT1 reticle better. The Zero Comp has every feature I want, a clean reticle and similar price point. I'm usually wary of new products and companies, but given the pedigree ZCO has and @Lowlight's confidence, I'm taking the leap. I look forward to shooting 2019 matches with some Zero Comp glass. So thank you all for the info on this thread. Thank you @gebhardt02 for your responses on here as well.
That video looks very familiar
it indeed had to go back for warranty repair. TT was VERY quick with turning it around. A detriment of their turret and zero design is something so simple at a glance as having a turret marking off, can NOT be reset by the end user. Man i miss that scope.... the glass is incredible. I was really really really wanting the ZCO; but, a series of big life decisions and a health issue has put me off from shooting for a little bit. I love that the release is going well for ZCO, and hope to pick one of these up in another year or two when I come back.
Im in the same boat. Ive been waiting since the initial release from shot last year. Im #2 on the list at Mile High for a mptc2.
That video looks very familiar
I was really really really wanting the ZCO; but, a series of big life decisions and a health issue has put me off from shooting for a little bit. I love that the release is going well for ZCO, and hope to pick one of these up in another year or two when I come back.
Let us know when you're ready again
If anyone wants a ZC527 MPCT1, I will have one left tomorrow. Please give me a call at 916-670-1103
There’s a video of it a couple posts down in another thread.
Also, supposedly, zcomp has started making the elevation turret work the same as the windage starting with the next shipments. I have a couple coming in soon. Hopefully I’ll be able to verify this.
Here is the other thread.
https://www.snipershide.com/shootin...ero-compromise-tangent-theta-schmidt.6923960/
The video in the other thread is pretty representative of what's going on. Mine isn't as bad as that (it just needs a smidge of back pressure to line up right rather than an actual effort to turn it back) and it seems to be getting better. It's not so bad that it'll put me off a click anymore and I probably won't send it back for a fix unless I just have the random time and patience to or if something else goes wrong with it.
Not to miss quote CStactical, but I was on the phone with them yesterday. I believe they are preparing something to show us, and was assured the turrets are just fine. Very nice group of guys over there, and I appreciated them spending the time with me to ensure I’d get a product up to my satisfaction.
Can someone measure obj. With a caliper i got some aad caps laying around maybe i could use some. Tnx
Quick question. I emailed tenebraex about caps and a kill flash and they said that zco would be retailing them directly and to contact you guys? Any words or updates on caps and kill flash then?
It was posted on another thread, the adapter ring and ard may not be in production yet
Attachments
Last edited:
We received the latest batch in today and the turrets feel even more positive, than the previous models that were still very good.
Mike will be doing a comparison soon, stay tuned.
Oh and if someone wants a 5-27 MPCT1 you better call fast...
Mike will be doing a comparison soon, stay tuned.
Oh and if someone wants a 5-27 MPCT1 you better call fast...
If anyone is looking for the best throw lever or level for their ZCO scope check out MK Machining. Shoot @Tyler Kemp a message to get yours!
Attachments
Yes I realize that was posted, but go try to buy any of those parts.
That's why I emailed tenebraex directly, and they said zco would be selling them.
I would assume "under development" also, but I don't work there so I don't make those claims.
Last edited:
The covers you can buy, I got them from Europtic, the tenebraex adapter and ard are not yet available
Unfortunately it does not fit correctly and that is why a new adapter is being made.
Dumb question, does the scope come with a sun shade in the box? Sorry if this question has been asked already.
Similar threads
