This is what’s in the box
Rifle Scopes Zero Compromise Optic update
- Thread starter gebhardt02
- Start date
This is what’s in the box
At least they offer bikini's with them, Kahles just offers the wetsuit
Have one in hand. Will be fondling it more tomorrow and running a match with it Sunday.
Initial impressions are extremely good.
Initial impressions are extremely good.
I like bikinis..once theyre off nothing to worry when adj manif or cycling bolt and caps is on the way..
Will be taking it out more tomorrow and Sunday will have a lineup of hendsoldt, tangent, Schmidt, kahles, and several others to look at it next to.
Will like write up something on Monday. But won’t be a “it’s better than this, but not that” glass comparison, as that gets too muddied up.
Will like write up something on Monday. But won’t be a “it’s better than this, but not that” glass comparison, as that gets too muddied up.
Is a 6 Bra like a B cup or a full C?
I’m not sure but I want to see pics regardless of size ?
Worth mentioning, mine had a bit over 37mils total travel.
I have a little over 23 mils with a 20moa rail and 0 moa 1.5” spuhr.
I have a little over 23 mils with a 20moa rail and 0 moa 1.5” spuhr.
Thats enough dial without holding over..even with a slow 308 to 2k yards
good to know
What size spuhr mount would be best for a 20moa rail? My scope should be here next week, the only spuhrs I see in 36mm are the 1.5" 0moa.?
Your choices are 1.18” and 1.5”.
If you have a flat top chassis, or have an nvg rail, go 1.5.
If it’s just the barrel you need to clear, 1.18 should get it done.
As you can see here, I have the low 20moa AI rail, and an nvg Mount without the rail attached. I need a 1.5” to clear properly.
If I took the nvg Mount off, I could run a 1.18.
If I attached the rail to the nvg, I’d need to add the high rail to the AI for proper alignment.
If I took the nvg Mount off, I could run a 1.18.
If I attached the rail to the nvg, I’d need to add the high rail to the AI for proper alignment.
We have one Zero Compromise Optic ZC527 5-27x56 MPCT1 reticle Right Wind Turret shipping in, please call 916-670-1103 to pre-order it
https://www.cstactical.com/zco-5-27x56-riflescope-right-wind-turret-w/-mcpt1-reticle.aspx
https://www.cstactical.com/zco-5-27x56-riflescope-right-wind-turret-w/-mcpt1-reticle.aspx
We have one Zero Compromise Optic ZC527 5-27x56 MPCT1 reticle Right Wind Turret shipping in, please call 916-670-1103 to pre-order it
https://www.cstactical.com/zco-5-27x56-riflescope-right-wind-turret-w/-mcpt1-reticle.aspx
Unless you find yourself constantly using the tree, this reticle is perfect.
It's always tempting to get the latest and greatest, but what does the ZCO give you that your Minox and AMG don't already provide? Not saying you shouldn't get the ZCO, just wondering what you think you'll benefit from with the ZCO that you don't already have with your current scopes?
New hotness chasing. Better clarity or resolution or brightness. Ultimately, I want a Minox with better turrets that can be serviced here.
Right now one of the two doesn’t have a home, so it’s almost an opportunity to sell both and go real big. Even TT big, but until I see a Gen3 XR in the flesh I won’t commit to TT even if Armament Technology will be around until there’s no wars left.
I hear you on the “being serviced here” thoughts, I like scopes that can be serviced in the USA quickly. I don’t have an issue with my Minox turrets but I’ll be curious once ZCO gets their turrets figured out how they compare.
Last edited:
I've probably handled more ZCO's than anyone outside of ZCO themselves and I could not duplicate the issue posted in that video.
Last edited:
I hear what you're saying, but others mentioned they had similar issues as well as preferred the feel of the windage over the elevation, ZCO has said they will fix those issues, that's what I'm referring to.
PS - I bet you have handled more than anyone you lucky dog!
I have an mpct2 showing up later this week. I’ll report back if the turrets feel the same as my mpct1.
My mpct1 elevation feels a little different than my windage. Can’t say one is “better” than the other. But I can feel a difference.
To be fair, this is common on many optics.
Is this the first of the mpct2’s or have they already been trickling into the wild?
Supposedly it’s the updated batch.
Mpct2 have already been in the wild. Just no one on the forum that has one has posted much or specifically stated they have them.
Other's? I saw a sample of one with a potentially problem and @gebhardt02 offered to get it fixed quickly, the rest I've seen is more based on the 'different feel' of the turrets that doesn't mean there is something wrong with them. They did make an extremely minor revision that has the elevation replicate the 'feel' of the windage. But I do not see any issues. There's not one scope manufacturer we carry or have carried that you can name that has not had an issue with their scopes regardless of the cost, anything man made can have an issue but the Tier one scopes tend to have less issues much less often.
They MPCT2's have been shipping since they were first release and are the most popular model by far!
There's a customer that's probably bought nearly 1/4 of the ZCO's we've gotten in
It would be nice to have that amount of disposable income.... I'm trying to figure out how to save up for one and buy in a year or two.
Now why would I go and do something silly like that?
Actually, I usually prefer a reticle like the MPCT1 but the MPCT2 is very clean and looks like a great compromise for someone like me. Or wait there aren’t supposed to be any compromises.
If I could afford both I’d do it!
Actually, I usually prefer a reticle like the MPCT1 but the MPCT2 is very clean and looks like a great compromise for someone like me. Or wait there aren’t supposed to be any compromises.
If I could afford both I’d do it!
I didn't say there was something "wrong", I said "once ZCO gets their turrets figured out" and what you've just stated with "They did make an extremely minor revision that has the elevation replicate the 'feel' of the windage." infers the "figured out". I also never said that no manufacturer has not had their issues, they certainly have. Minox had numerous turret issues when they first released the ZP5, they worked hard to get those issues resolved so newer models tend to have a better turret feel than older ones, does it mean the older models had something "wrong" not necessarily, they just took customer feedback to make them better and that's what I see ZCO addressing as well, we know these situations occur even among alpha class scopes, I'm not pointing the finger at ZCO, was simply just stating I'll be curious how the ZCO turrets compare to the Minox ZP5 (newer) turrets once they get their turrets figured out - meaning refined based on customer feedback.
Looks like it has the raising tab right above the 30mil mark that pops up like on the Kahles scopes.
Gotcha, missed it in my first viewing. Looking for it now I see it.
Similar threads
