That’s known as the AT LE. Great set up. Thumb hole is a vibe thoughis AX stock on AT frowned upon in this micro community, or whatevs? Post pics if you have one please.
![Grimacing face :grimacing: 😬](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f62c.png)
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportThat’s known as the AT LE. Great set up. Thumb hole is a vibe thoughis AX stock on AT frowned upon in this micro community, or whatevs? Post pics if you have one please.
Maverick 41Saw this auction going on for what I thought was an AXMC. Have you guys seen this model before? I've never seen 'AI SF'. Couldn't find anything about it online either. View attachment 8437111
Huh. That’s pretty interesting. Here’s a couple links on that gun:Maverick 41
It was a awsm action in a ax chassis. Pretty cool rifleHuh. That’s pretty interesting. Here’s a couple links on that gun:
![]()
Maverick 41 .338 Lapua Mag Rifle Package
Maverick 41 Rifle Package | Only at EuroOptic.com!www.eurooptic.com
They don’t have “SF” in the serial, however. No idea what that means.
Some folks must be spending -$20,000,000 to get this shit down to $255…
I just put the same barrel on my AT. It is a hammer
Hit the range today and shot some more boringly accurate groups. Love this damn thing.
Anybody have pictures of an AT with Razor Gen 2? I'm looking at an NX8 4-32, Razor II and T6Xi 5-30 still. One of these days I'll make a decision.
View attachment 8441167View attachment 8441168View attachment 8441169
How’re you liking the pmii 5-25 vs Tangent 5-25? Since you own both scopes. I’m deciding on a pmii 5-25. Or just get another Tangent for my next AI.A little AI VS SAKO competition today. My bestest AXSA ES, how did that color go again @Krob95 ?
High winds and 200 yards.
View attachment 8441217
View attachment 8441218
View attachment 8441219
The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.
View attachment 8441220
Where do you all get your Proof prefits?
ES? You mean the best and most highly accurate color to grace our lifetimes? I will forever regret selling mineA little AI VS SAKO competition today. My bestest AXSA ES, how did that color go again @Krob95 ?
High winds and 200 yards.
View attachment 8441217
View attachment 8441218
View attachment 8441219
The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.
View attachment 8441220
It wasn't a prefit. Custom job done by JR Firearms in the UK.Where do you all get your Proof prefits?
I've got an injured hand at the moment so controlling the rear bag has quite uncomfortable.. was still sub MOA at 900yds but nothing to shout about.I just put the same barrel on my AT. It is a hammer
How’re you liking the pmii 5-25 vs Tangent 5-25? Since you own both scopes. I’m deciding on a pmii 5-25. Or just get another Tangent for my next AI.
Ah, degloving? I have not the pleasure of experiencing that.It wasn't a prefit. Custom job done by JR Firearms in the UK.
I've got an injured hand at the moment so controlling the rear bag has quite uncomfortable.. was still sub MOA at 900yds but nothing to shout about.
At 100yds it was .2 -.3 MOA groups all day... prior to my injury...
Don't wear wedding rings folks.. that's all I'll say as the rest is quite graphic![]()
Yes indeed. Fortunately they saved my finger on the night and just needed everything stitching back together.Ah, degloving? I have not the pleasure of experiencing that.
I wish you a speedy recovery.
Thanks..Comparing the s&b to tt (5x25), I'd take the TT for sure. But with the s&b 6x36 I was using yesterday on the TRG, I'd probably pick that over the TT 5x25. My old eyes need some higher magnification![]()
I hate mdt and am open to suggestions on 90 degree gripsNice paint! But that grip is giving off serious “banana in the tailpipe” vibes
I hate mdt and am open to suggestions on 90 degree grips
If you don’t need the AI-specific ones, these worked for my legacy R700 AICS (and I suspect would work on the other thumbhole variants of factory AI guns but not sure): https://a.co/d/9xuRrBlWish I could find cheek peace screws from Accuracy international very difficult to locate
I kind of wanted to get the AI onesIf you don’t need the AI-specific ones, these worked for my legacy R700 AICS (and I suspect would work on the other thumbhole variants of factory AI guns but not sure): https://a.co/d/9xuRrBl
I sympathize. If you give up, these are nice. Not as cool, but nice:I kind of wanted to get the AI ones
Looking for some Accuracy, international cheek piece screws not much luck
These are available too. I've ordered from them several times and no issues.![]()
Accuracy International - Cheekpiece Thumbscrew (Single) - 20333
Genuine Accuracy International Cheekpiece Thumbscrews. Price shown is per screw. * Please note these no longer include AI logo. ** Not suitable for new AT-X.www.sportingservices.co.uk
The new Vision Grip is supposedly very good from speaking to a couple of the Vision Pro team.I hate mdt and am open to suggestions on 90 degree grips
Win-Tac weights that are specific for AXSR Keyslot are available at EO & Mile HighGuys where can I find weights that fits the AXSR chassis ?
ThanksWin-Tac weights that are specific for AXSR Keyslot are available at EO & Mile High
I plan on taking mine apart if i can find directions because the rear left screw was loosish and i never touched it before. I saw my proof barrel a tiny amount tilted to the left torqued to spec and went over all the bolts, that is when i found out one of the action screws was not torqued. It needs deep cleaning so i plan on taking it apart.Has anyone with an ATX played with the action screw torque?
You know i forgot about thatThe new Vision Grip is supposedly very good from speaking to a couple of the Vision Pro team.
They Remington is about as soy as that bed spread.... #notanAI
Has anyone with an ATX played with the action screw torque?
Sawtooth/dependabuilt also makes some.Guys where can I find weights that fits the AXSR chassis ?
I just took mine apart and torqued it. The rear screws almost felt like they were glued in. Damn near gave up I was afraid to strip them. Torqued the action screws to 35 inch lbs per the manualI was dm’ing Husky but here it is apart somewhat:
View attachment 8442450
Remove barrel (not mandatory, makes it easier if you have a long handguard/nv bridge)
Remove rear chassis bolt.
Remove front chassis bolt
Remove the bolt behind the mag release
Remove the (whatever you call the hinge/sling thingy)
Rail/chassis comes off
Remove 2 trigger screws
Then remove the 4 action screws the action comes off
I just took mine apart and torqued it. The rear screws almost felt like they were glued in. Damn near gave up I was afraid to strip them. Torqued the action screws to 35 inch lbs per the manual
The screw behind the mag latch is just for the mag latch. Didn’t have to be removed to remove the action.
Also the sling stud/catch for the folder thing…ya you can remove or install that anytime. Doesn’t connect anything internal. Just that catch itself. It’s really easy to strip the head on….ask how I know
View attachment 8442501View attachment 8442497
Same thing on mine. I torqued them all even to 35 in lbs. Maybe it’ll shoot like crap now idk. But at least if I need to strip down for any reason I know what I’ll return the torque toThe rear ones were really tight, and made good noise breaking loose. Front ones were hand tight.