-
Having trouble using the site?
Contact support
Shot Show 2025 Rumours
- Thread starter beetroot
- Start date
Any idea how much the backbone weights with the Buttstock adapter for the LSS gen 3?
Manners released a new folding stock, the Pro Pack Hunter, 31oz
E: Instagram post wont link, it’s @mannersstocks most recent post
Photos lifted from Rokslide:
E: Instagram post wont link, it’s @mannersstocks most recent post
Photos lifted from Rokslide:
Last edited:
SAC is better since it used the headspace inserts has the funnel base. There is no flopping around with the SAC drop.
don't you math me
Seems a little on the high side. Not too far off of an upranger, but I'm interested in seeing a full breakdown.
oh no... I just realized why it's called the HNT26
Sandman X
$999-1099
printed, Xeno or Keymo, interchangeable front end
300 RUM
6.4-6.9"
14.5-16.9oz
Apparently Athlon is dropping a Xero clone at $350 MSRP. Info from Reddit.
There are 2 m-lok slots at 9:00 in front of the magwell, so it should be as simple as adding a section of m-lok compatible arca rail.
From the comments on Manner's instagram post:
Molded in ARCA on the folder probably saves just a bit of weight over the aluminum ARCA on the regular PH.
Personally, I lean towards preferring a replaceable aluminum ARCA (even if it is a little heavier than molded in) as it's easy to swap if you happen to get one that's a little out of spec and is a little loose if you run a non-adjustable lever clamp like a 1st gen RRS Anvil, or if you somehow damage the rail. Much easier to swap a rail than replace/exchange a stock, but there are tradeoffs for the lightest design.
While I really like the LRH I picked up about a month ago and was planning on ordering a second one, now I'm trying to decide if I want to order one of these folders instead of the second LRH, or sell the one LRH I already have and get 2 of these folders instead... I knew I should have waited until after SHOT to pick up the stock, I was hoping the LRH-TK and TCS-Max were the only surprises Manners had up their sleeve this year, lol.
Going to wait to hear some feedback from the early adopters how the hinge lockup is before I decide what to order though. Hopefully it's solid and doesn't have any flex/wiggle/rattle.
Honestly if it picks up shots as well as a Garmin and they have a better interface that allows you to exit and reenter shot strings, this could be a winner. I'm not going to rush out and grab one but I'm interested.
I don’t see one in my future, but I’m leaving the possibility open. It’s a little funny the market was basically there for the taking for compact, affordable radars for years. Garmin came in and dominated, now suddenly competitors keep popping up.
Manners bringing back the zombie craze?
ZCO mag throw lever
Dillon has a new bullet feeder
ZCO mag throw lever
Dillon has a new bullet feeder
Any estimated MSRP on their bullet feeder? Hopefully less than a MBF but you never know with Dillon
No info yet, sorry.
ADG Arc Annealer, automated induction, no other info
ADG Arc Annealer, automated induction, no other info
That throw lever looks pretty nice. Any idea of availability? Glad it doesn't look like TT's version
that's comeptitve with the case feeder. I was hoping tthey would undercut the amp but it's a fair price given the market. I suspect a lot of people will sell the amp to go with this barring any large issues.
A steel frame 1911 is peak innovation. Can’t wait to see all the new innovative brass cased ammunition that’ll be released.
ARC Annealer is imported from South Africa.
ARC Precision
Welcome to ARC Precision, the home or precision annealing. ARC is the home of the original #myAnnealer. Annealing cartridges for reloading is common these days as it extends the cartridge life and annealing provides for improved velocity consistency. As the neck and shoulders are normalized...
www.youtube.com
Here's a draft copy of the user manual from when I contacted them a year ago.
Meh. I have zero reason to sell my AMP and automation for this. Might be tempting for new buyers if they have some equivalent of AMP's Aztec.
I've heard very few people recommend or speak highly if the amp-mate, especially when you need to add a case feeder. if you already have an automation solution (albeit an extremely expesnive one) then that's great. but i think the automation built into this will be very popular
Yeah the AMP-Mate is rather complex and expensive for sure. I haven't had issues with it, but I know plenty of guys that have. I ended up making my own case feeder to go on top so I'm not into it as much as others.
We'll see. If it has some form of reliable automatic setting determination, it'll probably be popular. If it doesn't, I think it'll end up being too complicated for the average end user.
The manual above suggests it has a sacrificial testing and set like the amp - I agree that is a criticial function at this price point.
Plus this doesn't have expensive pilots and comes with everything to run up to 338 which is pretty cool! looks like they have risers you use to set the height as it goes in base head down.
Last edited:
I wouldn't be too surprised if they provide codes/times for their brass but no one else haha
ADG will sell well to hunting crowd, but I really don't think it poses any real threat to AMP (particularly given ADG's price point and that AMP has done a good job establishing their product as the gold standard). Sometimes competing products can expand markets faster than they can capture said expansion, too.
I'm guessing you had to set up some sort of automation, not just gravity fed?
Pelican released a poppy pushy DAKA competitor
Don't really see a point for rifles, but whatever floats your boat. Maybe for a small multipurpose case that you're using to transport NODs, thermal, etc.
Last edited:
Actually of interest... new Hawkins scope mount, has side mounts for flashy things
Nightforce doing their thing, pa rum pa pum pum
Nightforce doing their thing, pa rum pa pum pum
So is NF releasing anything new other than banging scopes on stools?
I really want to see NF do this with two scopes, steel drum Rasta-style.
Probably would turn out more like…
I don't think many will just dump a Garmin to test it...but it'll put a major pinch in the market that Garmin used to have a strangle hold on.
I expect a Garmin Gen2 and the rest of the market will have to either drop price or add features.
New buyers that waited might be 2nd guessing the Garmin now...I know I would
at the PRS finale is was teased that Garmin was working on more things. Surprised to see nothing at shot show.
The shooting world is more stagnant than Apple right now. It’s literally reached pimp my status.
Similar threads
