A lot of heat guns will do 1000+ degrees. Not sure where you used it, but not a lot of stuff gets that hot.
-
Having trouble using the site?
Contact support
Bergara sucks ass, buyer beware.
- Thread starter redneckbmxer24
- Start date
Given your level of intelligence I’m not the least bit surprised that you wouldn’t realize such an issue if it had horns and flashing lights.
Just because you can’t fathom someone owning hundreds of guns and setting up lots of guns for people doesn’t make it bullshit. It just means you’re small time and that’s ok, but at least pull your head out of your ass and realize that there’s more than just your little world.
I don’t even know that guy and he doesn’t know me, but that’s an interesting conclusion that you come to when someone has an opposing view to yours because they’re not a fucking idiot.
A clothing iron set on high, placed on top of the rail will soften it enough to remove the rail. Kept on for a longer period of time allows removal of the JB or whichever epoxy is used.
Using the iron is also a standard practice to remove BR barreled actions that are epoxy glued in.
Disclaimer:
I've read recently that newer irons don't get hot enough to soften the epoxies.
My iron is old, like it's owner. It gets plenty hot enough.
JB Kwik releases a lot lower, it takes less heat than high temp red loctite to release. It’s like 300 degrees IIRC whereas regular JB is like 500. They also release differently at their temps too. The Kwik will release and come off pretty easy where the standard just sort of because pliable and you still have to basically chip it off.
The case is far from 1,000. I have used on the intake and transfer ports, which are still less than 1,000 for sure. I don’t believe I’d try it on an exhaust port.
Competence? You're a sack of shit with no bonafides talking about competence. You bed your rails because you can't shoot and you're looking for magic solutions to correct shooter error. You probably lap your rings too like a fucking idiot. But, no matter what you do, you can't polish away a bad shooter.Ownership doest imply competence. As far as I know you couldn't find your ass with both hands.
So 2k for his rifle correct. You got pay pal ready?
I don't know what dirtyD told you, you had to do to get "bonafied" but....
You got 2k ready for the rifle yet or you just gonna run your dick holster?
All I heard was "bla bla bla, I can't shoot my rifle and I've been caught lying a dozen times and making ridiculous bogus claims in this thread".. seems like every other thread you've ever been involved in.
I wouldn't give $2k for that rifle if it came with $1,200 in cash stuffed in the mag well. It's a fucking $800 rifle new. Where did you get this idiotic number from?
Hell, I've offered him $600 for it. Considering the barrel is 25% shot out, I've offered him actual value for the gun. You're so hung up on fondling his hairy twins that you can't do the math and realize that I have put my money where my mouth is. Now take your mouth off of his and go find a cop bashing thread where you're more comfortable.I don't know what dirtyD told you, you had to do to get "bonafied" but....
You got 2k ready for the rifle yet or you just gonna run your dick holster?
Thought they cost more. They do cost more than 800 though.
Neither here not there because all you were ever gonna do is run your dick holster.
600 value.
stupid.....
Last edited:
My $600 offer is real homey. I'm always ready to back up what I say. I realize you aren't, so you don't think other people are. I don't have an internet persona, I'm the same guy in the real world as I am on the internet. Unfortunately the internet is clogged with mouthy oxygen thieves like you who are softer than butterfly farts, but badasses safe behind the anonymity the internet provides. It's glaringly obvious who the frauds are..... like you.
Your replies already made it obvious that you couldn't comprehend what was written anyways. You're a waste of calories, and you always have been. You aren't built for an arguement with me. You're as weak as circus lemonade.
It comes with a rail!! Custom bedded!!
Take it off and it groups .6 and .9, stick it back on and it's a 4 moa rifle.
Damn you Bergara and your garbage rifle.
I'm still waiting for bicycle boy to prove that actions deform under recoil like he claimed. You'd have to spend hours searching the internet to find a claim moronic enough to challenge that. I wonder if he learned that from his girlfriend. Fucking clown world.
Let me guess... It's one (or a combination) of the following:
• The item you order is garbage to begin with.
• They send the wrong item.
• The carrier delivers it to the wrong address.
Amazon is a fucking joke, both retail and delivery. And it seems FedEx and UPS are in a race to claim the title of being the most worthless bunch of lazy dipshits possible.
Mike
Who are you again?
Yawn.
Dissappear back into obscurity, I'm sure they miss you there.
Bergara B-14 Sierra Wilderness 7mm PRC 22" 1:8" #5 Fluted Bbl Rifle w/Omni MB, Fluted Bolt, Synthetic Stock & 3rd Fixed Mag B14LM8013
Bergara B-14 Sierra Wilderness 7mm PRC 22" 1:8" #5 Fluted Bbl Rifle w/Omni MB, Fluted Bolt, Synthetic Stock & (1) 3rd Mag B14LM8013 For Sale
I’m pretty sure 150-200 rounds out of 1500ish round barrel life isn’t 25% either.
But what was that comment about someone not being able to math?
I used to think dumbfuhq was the biggest idiot on this forum, but I think you win. There’s no way that your IQ is out of the single digits.
Right. Weird how I shot my 3lbs lighter Seekins Element 7PRC on the same day and didn’t shoot a group over 3/4moa…
Oh man! Thanks ! Being left out of the insult line in this stellar thread was beginning to adversely impact my sense of self-worth! Good retort, by the way!
I was off by $80. That barrel will never make it to 800 rounds, that's common sense.
Questioning my IQ is comical at best.
Hey, while I have your attention, show me how actions deform under recoil.
You're so full of shit. You have been caught over and over again lying your ass off and also talking out of your ass. You have no idea what you're talking about.
Questioning my IQ is comical at best.
Hey, while I have your attention, show me how actions deform under recoil.
You're so full of shit. You have been caught over and over again lying your ass off and also talking out of your ass. You have no idea what you're talking about.
Attachments
There’s plenty of slow motion videos showing rifles flexing under recoil that you can easily find if you want to see it. I’m not going to waste my time posting something else for you to dismiss or choose not to see because it doesn’t fit what you want to believe.
Welcome to my ignore list, you’ve earned it.
Welcome to my ignore list, you’ve earned it.
Ugh, yeah sure. I've been searching for any evidence of an action deforming under recoil for hours. Unsurprisingly, it doesn't exist. This falls under category (B) I think..I don't think this is another lie, just more evidence that he has no idea what he's talking about, but will vomit bullshit all over our shoes regardless. Now I'm blocked? Softest redneck I've ever encountered. Pathetic.
Congratulations on your cherry picked group from last summer. Do you really think your positive experience invalidates my negative experience? If my rifle shot like that do you really think I’d be complaining?
Well asshole, it was the first three shots out of the gun that day so I saved it. I used the gun to shoot an Oryx a week later and it worked fine. I think you are mostly an asshole and a fuckwit to be honest. If you bought four Bergara guns and hated them all, what kind of fucking idiot buys another one? You, you are the idiot who buys another one.
My experience does not negate your stupid experiences in any way. Like 99% of us here, I am wondering why you keep fucking with a gun you hate? Why not sell it and move on? Are you really trying to fix it for the next guy? I think not. Maybe you shoot like shit, maybe you shake like you are shitting a peach seed? Maybe shooting it until the barrel is roasting hot and then shooting it some more is not the best way to get groups.
We are seven pages into your drama and you are calling everyone who questions your stupidity out. Why not clean the gun, put it back in the box and sell it and stop fucking whining, now there is an idea. Why keep trying to polish a turd, are you fucking dense?
No dog in this brouhaha, I just like good jokes and insults. Waste of calories is okay.
IMO, the one that I learned a while back sticks in my mind.
"5,000,000 sperm and you were the fastest?"
Anyone is welcome to borrow that. Or, "the best part of you ran down the crack of you mother's ass."
Of course, old standards like the short bus to school.
The way you guys are tossing roasts and insults back and forth, whether real or not, reminds me a lot of the group I used to work with in the early 2000s, up to about 2008.
Heck, if you didn't say something that we could use against you, we would make something up.
See, that is why I worked on shitting peach seeds with no movement other than the peristalsis and the painful stretching of the sphincter and no shaking.
Training is so important.
Dude has been offered $600, take it. We have full disclosure.
Nearly a dozen years in the army, a handful of years in the car business and the rest in construction. I'll take on any of them in the verbal sparring arena. The real question is, why so many of them want to start fights they are ill equipped for? I never attack anyone as an individual until they do it first. Bicycle boy and I have a long history of these exchanges. I kick his ass up around his shoulders (with ample help from his own ineptitude), and then he limps away mad. Sounds like I'm blocked now, so someone else will have to give that clown the business next time he purchases literally anything and pops into the forums to tell everyone how horrible the product is and how intelligent and wise he is. It's enough to make a fella vomit. The other one is just a special needs blowhard.
Best friend is a design engineer on several of the most complex tech and future tech, doesn't mean shit as far as me, you and this goat fuck is concerned.
A professional engineer isn't a mechanical or design engineer, they are for a lack of a better description, a professional student. I see them and deal with them occasionally, but when it comes to the nut cutting, they fold. Having a complex ability to understand a problem and design a solution for the problem are one thing, being able to read a book, study and pass a test is another, don't confuse them. I have spent 28+ years in R&D and military component repair, I have an ability to understand and think outside the box, studying and passing a test, f that noise.
I haven't been concerned about the paint issue on your unpolished turd, I have been focused on the picatinny rail and action fit, talk about someone that doesn't have comprehensive reading abilities, I haven't strayed from that conversation until I asked the question. Could give two shits, I wanted to know if that is really a common issue, because, apparently it is, and Bergara is selling garbage and you bought in three times.
Now, take your puddle of mud and build a fence. You refuse to answer every question and call us idiots, you're right, I am a fucking idiot for trying to help your ignorant ass solve a $3 problem with $20 of lipstick.
Take the rifle and your girlfriend's diploma and shove them both up your ass.
All epoxies have a temperature at which they soften. In aviation, if the cure temp is 150º, you try to never go above that temperature or the epoxy could weaken. It is dependant on the properties of the adhesive. That is why we use high temperature epoxies, composites and adhesives that are usually cured under vacuum or pressure for most everything.
He'll lose and he could have chosen to not even posted the thread and then when all was said done, posted the facts. But, that would have been too easy and less dramatic.
This should have been posted on Facebook, but there, Bergara may have seen it and called bullshit.
Since we have moved onto memes...
