-
Having trouble using the site?
Contact support
Tikka T1X
- Thread starter jbell
- Start date
Does anyone know where I can get a stock extension for the T1x MTR? I see there are some available for the T3X compact rifles but I have not yet been able to locate one for the T1X. The length of pull is much too short, I would probably like 2” of spacers to lengthen it up.
Attachments
Butt Spacer, Straight (incl. 2 spacers and long screws)
Butt Spacer, Straight (incl. 2 spacers and long screws)
Yikes…can’t believe I didn’t find those. Thank you for the quick reply.Butt Spacer, Straight (incl. 2 spacers and long screws)
Butt Spacer, Straight (incl. 2 spacers and long screws)www.berettausa.com
Good. Have had the rifle a couple years. Scope is new so I needed to sight in and record data. very fun rig.
I put the T3x Compact pad on my T1x. A bit longer length of pull and I fit perfectly.
there's IBI and Lothar Walther drop in barrels........I was hoping to see a 24" barrel, but seems like unless you go custom, you just can't get one....
accuracy mostly.... but also makes use of a tuner much more beneficial
I guess I'm unsure what barrel length has to do with accuracy, unless rimfires act differently than centerfires.
Finished up my build today with the addition of the vertical grip and another cheek piece spacer. I have been running practice drills with cheapo federal ammo out at my property to “season” the barrel. Tomorrow I’m bringing CCI Standard, SK Standard Plus, Norma Tac-22, and Eley Tenex to do some group testing at 50. Pray for me (and my checkbook) that the Tenex doesn’t shoot considerably better than the rest of the crew 
.
.Attachments
Last edited:
Looks like a good time! I agree with huntnh that the barrel tuner looks great. I also found on Saturday that SK Standard + shot the best out of my T1X, 5 five round groups between 1/2 and .65 MOA at 50 yards (laying down in my truck bed). Haven't shot it out farther than that yet.
i mean....have you seen a competitive rimfire benchrest gun with a barrel shorter than 24"?
Never paid any attention to competitive rimfire benchrest...
My question still stands, though. What is different with rimfire vs centerfire that makes a longer barrel more accurate?
FYI for anyone reading, these butt spacers do NOT fit the T1X. Got mine in last night and I am sending them back to Beretta today.Butt Spacer, Straight (incl. 2 spacers and long screws)
Butt Spacer, Straight (incl. 2 spacers and long screws)
Anyone care to share their average T1X groups at 50,100,200? Either Inches or MOA with either factory barrels or modified guns? Shot a little over 300 rounds tonight at those distances.
SK Standard plus still shooting best, even better than Eley Tenex. My 3, 10 round groups at 100 yards averaged out at 1.2”. My 2 10 round groups at 200 were at a 4” circle and I hit both 8/10 times with some nice center shots. Still not crazy about my trigger weight, might find a timney to put in.
I would also like to ask if anyone has trouble feeding Tenex? I loaded two magazines today and I had two light strikes and 2 bullets midway through the magazine fail to feed because they went nose up in the magazine. Doesn’t happen with SK or CCI?
Right after I shot my 100 yard groups, had a nice group of jakes and toms walk right past the target. Weren’t bothered a bit, despite trap league next door and the guy next to me shooting a 1938 Kar98 (which he was kind enough to let me shoot).
SK Standard plus still shooting best, even better than Eley Tenex. My 3, 10 round groups at 100 yards averaged out at 1.2”. My 2 10 round groups at 200 were at a 4” circle and I hit both 8/10 times with some nice center shots. Still not crazy about my trigger weight, might find a timney to put in.
I would also like to ask if anyone has trouble feeding Tenex? I loaded two magazines today and I had two light strikes and 2 bullets midway through the magazine fail to feed because they went nose up in the magazine. Doesn’t happen with SK or CCI?
Right after I shot my 100 yard groups, had a nice group of jakes and toms walk right past the target. Weren’t bothered a bit, despite trap league next door and the guy next to me shooting a 1938 Kar98 (which he was kind enough to let me shoot).
tuning. centerfire you tune with loading....rimfire you use a tuner. a tuner is much more effective on a 24" barrel.
What chassis is that?
Looking for something lightweight that will adjust very short for gaggle of grandkids of various sizes.
One of my own design; will be available Q4 of this year. Will work with adjustable AR stocks and will have our own folding stock coming out next year. Shoot me a PM if you want more info.
Anyone running the Anarchy Outdoors Tikka T1X threaded adjustable bolt handle upgrade?
Opinions or reviews?
Looking for a longer bolt handle and better knob.
Opinions or reviews?
Looking for a longer bolt handle and better knob.
Not a table. Poly tank. Used for all sorts of liquids. It's the next size up from a 55 gallon drum. 275 or 330 gallon sizes or so.
Does anyone know the weight of the factory 20in barrel by itself without the action? I'm swapping out for IBI flutted barrel (being made rn) and want to know how much extra front chassis weight I will need. IBI barrel 20in flutted is 1.25 kg (2.76 lbs).
Lol I think the 'lines' of the gun were long gone considering the bright blue chassis replaced the stock.
You’ve obviously never used one, the Sterk handle is about the best upgrade for the tikka out there.
That is correct, but also one shared by most people who have used it.
So "nothing" is the correct answer, at least according to that video. Pretty much what I figured.
I have nothing better to do while waiting on the A/C guy to fix some geothermal problems and I'm waiting on hold with Beretta USA right now to ask the same question.
Edit: Spoke with someone and they said they haven't heard anything either. No internal communications about it. They also said that when they get new products, there's a public release about a month beforehand (although not sure whether the news will come from Tikka or Beretta).
Has anyone tried the Sako TRG trigger unit on a T1X yet?
I asked last august and am about to jump in but hesitant for this reason.
I asked last august and am about to jump in but hesitant for this reason.
I've had one on order for seven months here in NZ.
Gun shop was told they should be arriving in early 2021, but they've heard nothing.
They know Beretta have had a couple of Tikka shipments land in this time, but nothing yet. Even the folks at Beretta locally say they don't have any info from Finland about when they'll be available.
Your second paragraph is what I heard when asking Europtic back in February.
I don't want to order til I know that they're actually here. I also have 2 lefty savages to sell as well.
Just got tracking info for my T1X. I can't wait, I've wanted this one for a long damn time now. Already ordered the T3X recoil pad, the more vertical grip, trigger spring, and Area 419 30MOA rail. I'll be pillaging my Athlon Midas Tac off my 10/22 for glass.
For those of you who are participating in ARA Factory Rifle Class matches, which version of the T1X are you using? Also, what modifications have you made, if any?
Thanks very much!
RFS99
Thanks very much!
RFS99
